Quotation on 3D print

Get the 3D print price of your part

The price of 3D print is not permanent, but depends on different factors. The price will vary from task to task, and we work out a specific price in every case. We always try to optimize the production method, so you get the best solution at the best price. The price depends on:

• Material
• Size of the part
• Complexity of the part
• Number of prototypes
• Aftertreatments

Fill in and send the quotation form below, then we will find the best solution and price for the 3D print.
NOTE: It is not possible to upload files with a total size exceeding 35MB.
If you exceed the 35 MB, please call +45 7650 2850

• Technology*Do you want an offer on several different technologies, please fill in a form for each technology or contact us.

  (choose technology)SLASLSPolyJetWaxPlaster
  0
• SLS material
  1
• Parts in SLS will be printed in the material DURAFORM PA12. A strong and flexible material, which is suitable for test of snap and screw mechanisms. SLS is strong enough to be used in finished products (rapid manufacturing) and can be used for moulds and tools.

  NB: Big SLS parts can twist dependent on the geometry.

  2
• SLS finish
  3

• There are several opportunities for finish on SLS parts

  Standard - The part is cleaned and bead blasted (glass) for extra material. Silk Surface - Vibration polishing of the part, if the part is suitable for it. Dye dipping - The part is dye dipped in the wanted colour (limited range of colours). Painting - If it is suitable the part can be painted in a optional colour. Enter the RAL code on the wanted colour.
  4
• Choose surface treatment*

  Standard

  Silk Surface
  5
• Choose painting/dye dipping*

  None

  Painting

  Dye dipping
  6
• Note RAL code + colour*
  7
• Note colour (e.g. light blue)*It is not possible to hit the exact RAL colour. Forward possibly colour example.
  8
• SLS layer thickness
  9

• At DAVINCI we print SLS parts in one layer thickness

  SLS layer thickness: 0,1 mm
  10
• SLA material
  11
• The SLA technology is ideal for parts with small and very fine details. It can be used for function models, where design and detailed mechanisms must be tested.
  12
• Choose SLA material*

  Somos WaterShed XC 11122

  Accura 25
  13
• SLA finish
  14

• There are several opportunities for finish on SLA parts

  Standard - The part is cleaned and polished for support material. Bead blasted (glass) - The part is bead blasted (glass), which gives a matt surface. Polishing - Honing of the part and following polishing. Dye dipping - The part is dye dipped in the wanted colour (limited range of colours). Painting - If it is suitable the part can be painted in a optional colour. Enter the RAL code on the wanted colour.
  15
• Choose surface treatment*

  Standard

  Bead blasted (glass)

  Polished
  16
• Choose painting/dye dipping*

  None

  Painting

  Dye dipping
  17
• Note RAL code + colour*
  18
• Note colour (e.g. light blue)*It is not possible to hit the exact RAL colour. Forward possibly colour example.
  19
• SLA layer thickness
  20
• Choose SLA layer thickness*0,025 mm is only possible for small parts (approx 20 mm) and can not be selected for the material Accura 25

  0,025 mm

  0,05 mm

  0,1 mm
  21
• Wax material
  22
• Parts in wax are 3D printed in the material VisiJet M3 Hi-Cast. Wax parts have very fine details and can be melted (lost wax).
  23
• Wax finish
  24

• Wax parts are from basis treated with standard finish

  Standard - The part is cleaned for support material.
  25
• Wax layer thickness
  26
• Choose layer thickness*

  XHD (0,016 mm)

  UHD (0,020 mm)

  HD (0,033 mm)
  27
• PolyJet part type
  28
• Choose part type*

  1K (single-material model)

  2K (multi-material model)
  29
• PolyJet material
  30
• The PolyJet technology creates detailed and complex 3D parts in materials with very various properties, from soft rubber to hard plastic. Read more about the materials and their properties.
  31
• The PolyJet technology creates detailed and complex 3D parts in materials with very various properties, from soft rubber to hard plastic. The technology gives you an opportunity to create multi-component parts by combining up to 11 different materials in the same print. Read more about the materials and their properties.
  32
• Choose PolyJet material*

  VeroClear 810

  DM 9840 (40A)

  DM 9895 (95A)

  Fullcure 720

  DM 9850 (50A)

  DM 8530

  VeroGray 850

  VeroWhite+

  DM 9860 (60A)

  DM 8520

  Tango+

  DM 9870 (70A)

  DM 8510

  TangoBlack+ (27A)

  DM 9885 (85A)
  33
• Choose which materials your model should exist of.*

  TangoBlack+ (27A)

  DM 9840 (40A)

  DM 9850 (50A)

  DM 9860 (60A)

  DM 9870 (70A)

  DM 9885 (85A)

  DM 9895 (95A)

  DM 8530

  DM 8520

  DM 8510

  VeroWhite+
  34
• PolyJet 2K assembly
  35

• How should your finished PolyJet 2K model look like?

  Remember to upload screen dump or another file of the gathered model with indication of materials/part components' position in proportion to each other. Here is an example.
  36
• PolyJet finish
  37

• There are several opportunities for finish at 1K PolyJet parts.

  Standard - The part is cleaned for support material. Dye dipping - The part is dye dipped in a wanted colour (limited range of colours). Painting - If it is suitable the part is painted in a optional colour. Enter the RAL code on the wanted colour.
  38

• 2K PolyJet parts are from basis treated with standard finish

  Standard - The part is cleaned for support material.
  39
• Choose painting/dye dipping*Dye dipping is only possible if the part is suitable for it

  None

  Painting

  Dye dipping
  40
• RAL code + colour*
  41
• Note colour (e.g. ligth blue)*It is not possible to hit the exact RAL colour. Forward possibly colour example.
  42
• PolyJet 1K layer thickness
  43
• Choose PolyJet layer thickness*

  0,016 mm

  0,030 mm
  44
• PolyJet 2K layer thickness
  45

• At DAVINCI PolyJet 2K parts are printed in one layer thickness

  PolyJet 2K layer thickness: 0,030 mm
  46
• Plaster material
  47
• Plaster parts are 3D printed in the material VisiJet PXL Core. The parts have fine details and are suitable for show models. It can be printed in up to 390.000 colour.
  48
• Plaster finish
  49

• There are several opportunities for finish on plaster parts

  Standard - The part is cleaned and impregnated with ColorBond (strengthen and enhance colours) Architecture - The part is cleaned and impregnated with Salt Water Cure (enhance white colour)
  50
• Choose surface treatment*

  Standard

  Architecture
  51
• Plaster layer thickness
  52

• At DAVINCI plaster parts are printed in one layer thickness

  Plaster layer thickness: 0,1 mm
  53
• Number of parts
  54
• Number*
  55
• Invoice info
  56
• Company*
  57
• First name & last name*
  58
• Address*
  59
• Postcode*
  60
• City*
  61
• E-mail*
  62
• Phone number*
  63
• Requisition (your requisition number)*
  64
• Possible comments*
  65
• Delivery address - only fill in if it is different from the invoice address
  66
• Company*
  67
• First name & last name*
  68
• Address*
  69
• Postcode*
  70
• City*
  71
• Delivery date and -way
  72
• Delivery date*Wanted delivery - exact delivery date will appear on the order confirmation.
  73
• Send with*

  UPS

  Courier (urgent)

  Pick up myself
  74
• File Upload
  75
• Upload your files. We accept following formats: STL, STP/STEP and SLDPRT In connection with illustration of assembly at PolyJet 2K parts we also accept JPG and PNG. If you are in doubt about, how to export to above files, you can find help here.
  76
• Files*You can upload more files by clicking several times.Upload
  77
• Send enquiry
  78
• Send
  79

Print